Direct Drive Model
Thermoplastic Injection Moulding Machine
Direct Drive Model
Thermoplastic Injection Moulding Machine
If you are seeking to buy a Direct Drive Model injection moulding machine, probably you are at the right place. Vishavakarma Hydraulic Machines is a top manufacturer and exporter of machines in the industry which is dedicated to enhancing manufacturing entities’ efficiency in the production of plastic products. The Direct Drive Injection Moulding Machine is equipped with the following features:
Standard Feature
- Compact Power Panel
- Shot Counter
- Time Control For Recycle
- Digital Display Time Pyrometer
- Larger Between Tiebar Distance & Platen Area
- Larger Maximum Mould Thickness
- High-Efficiency Heat Exchanger
- Hard Chrome Plated Tie Bars
- Centralized Lubrication System
- Screw Suck Back System
- Direct Hydraulic Screw Drive
- Mechanical Ejector
Optional Feature
- Core Pulling Attachment
- Hydraulic Door Safety
- Motorized Auto Mould Height Attachment
- Hopper Dryer
- PLC Microprocessor Control &
- Proporation Electro-Hydraulic Controls
- Hydraulic Ejector
- Accumalater System For Fast Injection
| THERMOPLASTIC INJECTION MOULDING M/C | |||||||||||||
| DIRECT DRIVE MODEL | |||||||||||||
| MODELS | VHM DD-70 |
VHM DD-100 |
VHM DD-200 |
VHM DD-400 |
VHM DD-600 |
VHM DD-800 |
VHM DD-1000 |
VHM DD-2000 |
VHM DD-3000 |
VHM DD-4000 |
VHM DD-5000 |
||
| CLAMPING UNIT | |||||||||||||
| Clamping Force | Tons | 50 | 80 | 120 | 165 | 210 | 280 | 315 | 380 | 450 | 650 | 750 | |
| Clamping Stroke | mm | 229 | 356 | 406 | 457 | 508 | 610 | 660 | 762 | 889 | 1016 | 1143 | |
| Mould Th. Range Min & Max. |
mm | 127X254 | 152X356 | 203X381 | 203X406 | 229X457 | 254X508 | 305X559 | 356X610 | 356X762 | 406X889 | 508X1016 | |
| Tie Bar Diameter | mm | 60 | 75 | 90 | 90 | 100 | 125 | 130 | 140 | 150 | 165 | 175 | |
| Platen Dimension | mm | 432X533 | 508X622 | 584X673 | 601X762 | 711X838 | 864X965 | 940X1016 | 1016X1118 | 1092X1372 | 1270X1524 | 1397X1905 | |
| Dist Between Tie Bar HxW | mm | 254X343 | 305X406 | 356X457 | 368X521 | 445X572 | 533X635 | 584X660 | 635X737 | 711X940 | 762X1016 | 838X1346 | |
| INJECTION UNIT | |||||||||||||
| Screw Diameter | mm | 35 | 38 | 45 | 52 | 57 | 60 | 65 | 75 | 90 | 105 | 120 | |
| Shot Weight G.P. Polystrain | Gms | 75 | 110 | 215 | 425 | 625 | 830 | 1075 | 2100 | 3150 | 4215 | 5250 | |
| Injection Stroke- Suck Back | mm | 105+20 | 140+20 | 175+20 | 230+20 | 280+20 | 330+20 | 370+20 | 410+20 | 510+20 | 610+20 | 650+20 | |
| Plasticizing Capacity | Kg./Gr | 17 | 30 | 35 | 45 | 60 | 75 | 90 | 120 | 140 | 160 | 180 | |
| Injection Pressure | Kg./Cm2 | 2110 | 2050 | 2000 | 1900 | 1900 | 1800 | 1740 | 1700 | 1600 | 1500 | 1350 | |
| Screw LD Ratio | Ratio | 18 | 18 | 18 | 18 | 18 | 20 | 20 | 20 | 20 | 20 | 20 | |
| Screw Revolution | RPM | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | |
| POWER UNIT | |||||||||||||
| Hydraulic Pump Motor | HP | 5 | 10 | 20 | 25 | 25 | 30 | 40 | 40 | 50 | 60 | 50+30 | |
| Screw Motor | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | HYD. | |
| Heating Capacity | HP | 3.5 | 6.5 | 8.5 | 9.75 | 11 | 14 | 16 | 18.5 | 22 | 25 | 30 | |
| Total Load | HP/KW | 8.5/6 | 16.5/13 | 28.5/22.5 | 34.75/27.5 | 36/28.5 | 44/34.5 | 56/44 | 58.5/46 | 72/56.5 | 85/66 | 110/86 | |
| Oil Reservoir Capacity | LTR. | 200 | 400 | 500 | 600 | 700 | 1000 | 1000 | 1200 | 1400 | 1800 | 2200 | |
| GENERAL | |||||||||||||
| Approx. Floor LxWxH | FT. | 12.5x3.5x6 | 15x6x6 | 17x6x7 | 19x6x8.5 | 20x6x8 | 22x7.5x8 | 22x7.5x8 | 25x8x8 | 28x8x8 | 35x10x9 | 40x12x10 | |
| Approx. Weight | KGS | 2500 | 4200 | 6000 | 7000 | 8000 | 11500 | 15000 | 19000 | 23000 | 27000 | 35000 | |