VS Series Model Thermoplastic Injection Moulding Machine
VS Series Model
Thermoplastic Injection Moulding Machine
Vishavakarma Hydraulic Machines avails world-class VS Series Model injection moulding machines at cost-effective prices. We always strive to provide our clients latest design machines and multi-function products that give them complete satisfaction. If you are looking for the best quality injection molding machine manufacturer, supplier, and exporter in India, then we are here to assist you in the best possible manner. Some of the standard features of the VS series model include
Clamping Unit
- 5-point Double Toggle System.
- Mechanical and Electrical Safety Devices.
- Low-Pressure Mould Protection.
- Multi-stage Control of Pressure, Speed and Position of Mold Open / Close.
- Fast Mould Clamping with Differential Device.
- Robust Casting Construction with Strengthened Tie Bar for Maximum.
- Service Life and Best Moulding Result.
- Automatic Mould Height Adjustment.
- Barivable Mode of Ejector Movement.
- Automatic Ce4ntral Lubrication.
Hydraulic System
- Efficient and Sound Reduced Hydraulic Pump.
- Hydraulic Proportional Control/Servo System.
- Hydraulic Elements By Well-know Brand, with High Reliability and Long Service Life.
- Oil Temperature Alam
Injection Unit
- Two Drive Cylinder for Crew Injection
- Multi-stage of Injection Pressure, Speed and Position
- Multi-stage of Holding Pressure, Speed and Time
- Multi-stage of Charging Peed, Position and Time
- PID Barrel Temperature Control
- Screw Platicizing Cold Start Prevention
- Screw Speed Inspection
- Self Purging Function
- Efficient Plasticizing Device With Strong Torque Motor
VS SERIES MODEL |
||||
| THERMOPLASTIC INJECTION MOULDING MACHINE | ||||
| MODEL | VHM VS120 T |
VHM VS165T |
VHM VS220 T |
|
| CLAMPING UNIT | ||||
| Clamping Force TON | MM | 120 | 165 | 220 |
| Clamping Stroke | MM | 355 | 450 | 500 |
| Min. Mould Height | MM | 150 | 160 | 180 |
| Max. Mould Height | MM | 400 | 450 | 500 |
| Tie Rod Diameter | MM | 70 | 80 | 960 |
| Distance Between Tie Rod | MM | 420x420 | 470x470 | 510x510 |
| Hydraulic Ejector Stroke | MM | 80 | 110 | 120 |
| Hydraulic Ejector Force | TON | 30 | 40 | 60 |
| Ejector No. | 5 | 5 | 5 | |
| INJECTION UNIT | ||||
| Screw Dia | MM | 40 | 45 | 50 |
| Injection Shot Weight | GMS | 150 | 265 | 450 |
| Injection Stroke+suck Buck | MM | 165 | 200 | 255 |
| Injection Pressure | KG | 150 | 150 | 160 |
| Screw LD Screw | Ratio | 21 | 21 | 21 |
| Screw Rev. | RPM | 0-250 | 0-200 | 0-180 |
| POWER UNIT | ||||
| Hydraulic Pump Motor | KW | 7.5 | 15 | 19 |
| Hydraulic Pump Pressure | KG | 150 | 150 | 150 |
| Screw Motor | ||||
| Heating Capacity | KW | 7 | 9 | 12 |
| Total Load | KW | 14.5 | 24 | 31 |
| GENERAL | ||||
| Oil Capacity | LTR | 200 | 300 | 350 |
| Approx. Floor LxWxH | FT | 15x6x6 | 17x6x7 | 19x6x8.5 |
| Approx Weight | KG | 4200 | 6000 | 8000 |